• Spa Pools

    Vortex Cerium™

    • Seating 4
    • Dimensions From 2m x 2m x .82m
    • Jets Up to 55

    Why Choose a Cerium?

    The Cerium is our compact hydrotherapy spa. It has room for the whole family. Twin Loungers deliver the ultimate full-body hydrotherapy massage, the shoulder and neck therapy seat concentrates on relieving stress from the upper body while the back massage seat completes the full set of hydrotherapy seats.

    Features

    Check out the top 5 features of the Vortex Cerium™ spa pool.

    Hydrotherapy seating for 4 adults

    The Cerium seats four adults in comfort and has many of the premium hydromassage features of larger spas in the Vortex™ range. 

    Twin loungers

    The Cerium has two luxurious loungers, each with specific targeted zones and jet configurations.

    Neck and shoulder therapy seat

    The side-by-side massage seats use a bank of 50mm directional and spinning jets to provide a shiatsu-style pressure point massage to the back and between the shoulder blades. 

    Cool-down seat

    The Cerium has one cool-down seat designed so you can move into a higher position to cool off if needed. 

    Individual seat pressure controls

    The individual seat pressure controls with EzyGrip™ handles allow you to effortlessly direct the water flow and pressure between the seats for the ultimate personalised hydromassage experience. Share the power or send it all to one zone, the choice is yours.

    Previous
    Next
    Gallery Image

    High-pressure volcano jet

    The high-pressure volcano jet is situated in the center of the spa to create a world class hydrotherapy experience. The jet is positioned in the footwell for the ultimate foot massage but it is also ideal for hamstrings, calves, quads and even chest.

    Gallery Image

    Hydroflow™ stainless steel jets (Avanté)

    Hydroflow™ Stainless Steel jets use the famous Vortex™ jet design which provides a premium massage.

    Gallery Image

    Hydroglow™ backlit jets and topside controls (Avanté)

    Chromotherapy is the science of using colours to create an environment focused on health and harmony. Hydroglow™ backlit jets and topside control lighting provide an adjustable and variable Chromotherapy experience.

    Purezone™ automatic water care system

    This system makes safe, clean and clear water easy and affordable. It includes two high-efficiency, pleated filters plus one Purezone™ Micron filter that removes particles down to five microns, a Purezone™ Ozone generator for advanced water clarification and the Purezone™ UV-C steriliser (Avanté) for removing water borne microbes.

    Tranquil water feature

    There is nothing more relaxing than the sound of running water. Add a touch of light and you have created the perfect sanctuary to be rested and mindful.

    Hydroglow™ illuminated drink holders (Avanté)

    It’s important to stay hydrated while in your spa. Our backlite coasters illuminate your drink and help reduce accidental spills. Included in Avante upgrade.

    Hydroglow™ perimeter and cabinet lighting (Avanté)

    The additional lighting to the water edge and functional outside lighting are included with the perimeter and cabinet lighting package. All lighting is customisable to suit your mood.

    Spa health indicator light

    The Vortex™ Spa health indicator light is designed to communicate the spa’s condition to spa user without having to lift the cover. The indicator lights up blue to show it is at the correct temperature, red to indicate a water temperature fluctuation over 5°C, or a fault.

    Premium SpaNet™ controller

    The SpaNet SV Series controller is designed to maximise energy savings and deliver the lowest possible daily operating cost for your spa using PowerSmart™ technology like Dynamic Thermal Tuning and SmartFiltration™.

    SpaNet™ variable output heater

    The SpaNet™ SV Series has a variable output heater. Unlike most controllers, this means when the spa's jet pump is turned on, the heater turns DOWN rather than OFF. This has the benefit of maintaining the spa's temperature while you are using it, rather than cooling it down.

    SpaNet™ integrated heat pump interface (Optional)

    If you want to save up to 75% on your spa heating cost, you can choose the optional SpaNet™ Hybrid Heat Pump. This integrated system is plug and play with the SV controller.

    SV SmartLINK™ WiFi module (Optional)

    Control and monitor your spa remotely from anywhere in the world! With the optional SpaNet™ SmartLINK™ WiFi/bluetooth control unit, just download the SpaLINK™ phone app (Android or Apple) and you can control all your spa functions simply and remotely.

    ThermoLock™ high-density locking cover

    Most of the heat loss in a spa occurs through the spa's cover. As such, it is important that the spa's cover is manufactured from a high-density foam that has better heat retention properties. The Vortex™ uses a high-density foam insert which is also heat shrink sealed to prevent water ingress, prolonging the cover's life.

    Thermolock™ dual layer insulation (Avanté)

    The Vortex™ dual layer insulation system ensures that not only the water in the spa is insualted, but also the water in the pipework. This option adds a higher level of heat retention than Vortex Spas standard Thermolock™ Permieter insulation.

    Permaframe™ timber-free construction (Avanté)

    Vortex Permaframe™ is a timber-free system, produced using high-impact, injection molded plastic. It is impervious to rot, mildew or vermin damage and designed to last indefinitely.
    Previous
    Next

    Colours to Suit Your Home

    Configure your item. Check out the colour options or use our augmented reality platform to view this product virtually at your home.

    Click to view in 3D

    View in home

    Open the camera app on your phone or tablet and scan this code

    View in home

    Customise

    Shell Colours

    Gypsum
    Sterling Silver
    Pearl Shadow

    Cabinet Colours

    Coastal Grey
    Coastal Grey
    Chocolate
    Natural

    *Disclaimer: The 3D and AR models may show additional extras. Actual colours may differ from renders.

    Why Choose an Avanté Upgrade

    Upgrade to the Cerium™ Avanté and take your spa experience to the next level with a range of features designed for added comfort and superior luxury. The Avanté model brings together a collection of Vortex™ Spas’ most popular upgrades which, when purchased together, offers significant savings.

    Cerium Spa Pool Standard
    Cerium Spa Pool Avanté
    If not 100% satisfied with your purchase, pay the return and we'll give your money back. Terms and conditions apply.
    If not 100% satisfied with your purchase, pay the return and we'll give your money back. Terms and conditions apply.
    We've put our money where our mouth is. We stand behind every product we sell with our amazing 10 year shell warranty.
    The Water Clarifier uses ozone technology to oxidize and remove micro organics and metals that are smaller than 5 microns resulting in the clearest water available.
    The powerful LED flood light does the heavy lifting to illuminate your spa at night.
    The SpaNet SV Series controller is designed to maximise energy savings and deliver the lowest possible daily operating cost for your spa using PowerSmart™ technology like Dynamic Thermal Tuning and SmartFiltration™.
    The Purezone™ UV water purifier system gives you crystal clear water using a natural process. It oxidises water borne organic compounds allowing them to be filtered away.
    Hydroflow™ Stainless Steel jets use the famous Vortex™ jet design which provides a premium massage.
    Chromotherapy uses colours to create an environment focused on health and harmony. Hydroglow™ backlit jets and topside control lighting provide an adjustable and variable Chromotherapy experience.
    This dual layer insulation system ensures that not only the water in the spa is insulated, but also the water in the pipework. This option adds a higher level of heat retention than Vortex™ Spas' standard Thermolock™ Perimeter insulation.
    Permaframe™ construction is a timber-free framing system that is impervious to rot, mildew or vermin damage. Produced using recycled, high-impact, injection molded plastic, it is designed to last indefinitely, hence the lifetime warranty.
    The additional lighting to the water edge and functional outside lighting are included with the perimeter and cabinet lighting package and are customisable to suit your mood.
    These backlit drink holders are functional and beautiful while creating a lighted, non-slip landing pad for your favourite beverages.
    Laminar jets create perfect streams of backlit water giving a gentle visual display. The jets operate independently of the hydrotherapy jets, so they can be turn your spa into an impressive light display in your backyard.

    Specifications

    Detailed specifications for the Cerium Spa Pool
    Specification Sheet
    Jet Featured Image
    2m
    2m
    SpecificationsStandard
    Dry weight285kg
    Filled weight (inc cover)1200kg
    Lift weight369kg
    Intuitive spa controllerSV2
    Programmable circulation pump1
    Jet pumps1
    Variable speed airblower1
    Variable output heater3kw
    Electrical requirements15 amps max

    Cerium Jet Layout

    The Vortex Cerium™ features 1,30mm High Pressure Volcano Jet, 2 x 127mm Directional Jets, 4 x127mm Single Spinning Jets, 2 x 127mm Twin Spinning Jets, 6 x 75mm Directional Jets, 2 x 75mm Single Spinning Jets,12 x 50mm Directional Jets, 4 x 50mm Twin Spinner Jets, 22 x 40mm Air Jets

    Jet Featured Image

    Standard Jets

    Jet Icon
    1 x 130mm Hi Volcano Directional Jet
    Jet Icon
    2 x 127mm Directional Jets
    Jet Icon
    12 x 50mm Directional Jets
    Jet Icon
    2 x 127mm Twin Spinning Jets
    Jet Icon
    65 x 75mm Directional Jets
    Jet Icon
    4 x 50mm Twin Spinning Jets
    Jet Icon
    4 x 127mm Single Spinning Jetss
    Jet Icon
    2 x 75mm Single Spinning Jets
    Jet Icon
    22 x 40mm Air Jets

    Vortex Cerium model shown

    The Vortex Cerium features a variety of jets perfect for relaxing hydromassage, rejuvenation and muscle recovery.

    Jet types

    Available jet types for this model

    Gallery Image
    Gallery Image

    130mm Hi Volcano Directional Jet

    These jets are either fitted into the footwell for the ultimate foot massage or positioned facing upwards in the middle of the spa to treat hamstrings, gluts, lower back and even the front of the abdomen.

    Gallery Image
    Gallery Image

    127mm Directional Jet

    The 127mm directional jets provide an intense, pressure point massage. These are particularly effective at treating knotted muscles in the back.

    Gallery Image
    Gallery Image

    50mm Directional Jet

    These jets are usually used in banks of 8 or more jets and are often coupled with 50mm twin spinners to give a shiatsu style pressure point massage therapy.

    Gallery Image
    Gallery Image

    127mm Twin Spinning Jet

    Like the 127mm single spinner, the twin spinning variation gives a kneading effect but by spinning at twice the speed of the single spinner, it gives more of a pulsating action.

    Gallery Image
    Gallery Image

    75mm Directional Jet

    This style of directional jets gives a targeted but less intense pressure point massage. It's very effective for a more prolonged treatment of tired muscles.

    Gallery Image
    Gallery Image

    50mm Twin Spinning Jet

    The 50mm twin spinner offers a pulsating massage effect ideally suited for neck and shoulder therapy or as part of a shiatsu style massages treatment when teamed with 50mm directional jets.

    Gallery Image
    Gallery Image

    127mm Single Spinning Jets

    This large single spinner gives a rotating massage effect similar to a masseuse using their thumb in a kneading fashion. They provide a very effective back massage.

    Gallery Image
    Gallery Image

    75mm Single Spinning Jet

    The 75mm single spinning jets offer a similar effect as the larger 127mm variety but given their smaller size, the kneading effect is lighter and more focused.

    Gallery Image
    Gallery Image

    40mm Air Jet

    As the name implies, the 40mm air jets emit an air stream as opposed to a water stream. These are almost always used under the legs and buttocks to provide a relaxing soft tissue massage treatment.

    Previous
    Next

    Warranties

    The Vortex Spas™ range of spas is covered by comprehensive warranty agreements providing peace of mind when you purchase Vortex Spas™.

    Download Warranty
    Lifetime Warranty

    Vortex Permaframe™ is guaranteed for life against a loss of structural integrity leading to the spa being inoperable.

    10 Year Non Pro rata Structural Warranty

    All Vortex Spas™ are offered with a 10 year 'non pro-rata' shell structure warranty. This means that if the spa's shell cracks resulting in water loss, for a period of 10 years, the spas shell shall be replaced.

    5 Year Non Pro rata Acrylic surface warranty

    All Vortex Spas™ are offered with a 5 year 'non pro-rata' acrylic surface warranty. This means that if the acrylic surface blisters resulting in water loss for a period of 5 years, the spa's shell shall be replaced.

    5 Year Plumbing, Heater & Jet Warranty

    The plumbing system of all Vortex Spas™ is warranted against leaking for 5 years. The heater and jets of all Vortex Spas™ are warranted against defects for a period of 5 years.

    2 Year Pump & Equipment Warranty

    The circulation pump, jet pump(s) and electronic control system of all Vortex Spas™ are warranted against defects for 2 years. *Please consult your local store for complete warranty details.

    Previous
    Next

    Similar Spa Pools

    You may want to check out these similar spas to compare features and find the right spa for you and your family.

    Vortex Cerium™
    Vortex Eon™
    Vortex Mercury™
    Seating465
    DimensionsFrom 2m x 2m x .82m2m x 2m x .82m2.00 x 2.00 x .92m
    Volume900ltr875Ltr996 Ltr
    JetsUp to 55Up to 13Up to 46
    Weight (Full)1,200KgUp to 1164kg1,305 Kg
    Price
    Find out moreFind out more